The ZIP K rapid roll-up door is a high-speed ZIP door with a space-saving design. The mantle has PVC zips that slide on self-lubricating polyethylene guides and connect the sheet for the entire height of the door ensuring water tightness and wind resistance (class 3). The “K” line features a motor housed inside the winding tube, which allows
installation in corridors and any other limited space, and the opening speed is increased to 2.5 m/s.

The FOLD-UP door is strong thanks to the folded frame in a 3 mm thick galvanised steel sheet.
The folding system consists of a sheet (PVC-coated fabric) strengthened internally by galvanised steel tubes placed inside welded pockets. The diameter of the strengthening tubes varies according to the resistance class for the required air pressure. The sheet assembly is lifted thanks to belts secured above the winding shaft.

The combination of high-quality raw materials and groundbreaking and cutting-edge productive processes – thanks especially to the latest profiling, pressing, and foaming technological systems – allows us to achieve the best possible production also of standard cold rooms.

CRC cold rooms can be completed and made work perfectly and immediately thanks to a Coldyfor refrigerating unit – saddle or ceiling monoblocks and split units - and internal shelving in aluminum and polyethylene.

Cold room with two separated spaces by a fixed dividing wall with operating temp. -20°C/+2°C.
The former is usually made in thickness 6 cm and 8 cm, with or without floor – that is optional according to the ease of use and cleaning. The latter is made instead in thickness 10-12-14 cm (also in thickness 8 cm with the addition of the door heating cable kit).
Those thicknesses guarantee a better temperature hold below zero, stability ensured by the use of the floor that, for this type of cold room, is mandatory.

CRC cold rooms can easily be installed in every space thanks to their high flexibility and modularity.

Actually, since they are designed for hotels, canteens, big restaurants, and commercial spaces, but also for hospitals, drugstores, and industrial environments, the cold rooms must be adapted to the structures and to the dimensions of the spaces where they must be installed.

For this reason, all Boxcold models can be customized according to the needs.
In the installation space where there are beams, pillars, special walls, and/or corners, Boxcold cold rooms offer the possibility to cover or bypass the obstacle by means of “special” panels (non-standard 20 cm modularity).

The Coldyfor project in fact consists in the design, production and sale of refrigeration units and was born from the need to offer a complete package of "cold room and refrigerating system" to customers/distributors and to do it quickly.

The Coldyfor project in fact consists in the design, production and sale of refrigeration units and was born from the need to offer a complete package of "cold room and refrigerating system" to customers/distributors and to do it quickly.

The Coldyfor project in fact consists in the design, production and sale of refrigeration units and was born from the need to offer a complete package of "cold room and refrigerating system" to customers/distributors and to do it quickly.

3 ribs profiled the outer sheet.
Prepainted galvanized steel or aluminum inner and outer sheet alternatives.
Production in various color options.
Application on roofs with a slope higher than 5%.
Fire performance according to TS EN 13501-1B-s2; d0 for PUR insulated roof panels, B-s1; d0 for PIR insulated roof panels.
Production flexibility at any ordered length between 2m and 15m.
Core thickness options 40-50-60-70-75-80-100-120-150-180-200mm.
According to TS EN 14509, U values range between 0,49 – 0,11 W/m2K depending on the panel thickness.
EPS insulation alternatives besides PUR and PIR insulation.
ISO, TSE, and CE quality certificates.
Production at the factories in Mersin and Sakarya.

4 ribs profiled outer sheet is compatible with the solar panels.
Prepainted galvanized steel or aluminum inner and outer sheet alternatives
Production in various color options.
Application on roofs with a slope higher than 5%.
The clamp allows the solar panel to be mounted without drilling.
Fire performance according to TS EN 13501-1, B-s2; d0 for PUR insulated roof panels, B-s1; d0 for PIR insulated roof panels.
Production flexibility at any ordered length between 2m & 15m.
Core thickness options 40-50-60 mm.
According to TS EN 14509, U values range between 0,49 – 0,34 W/m2K depending on the panel thickness.
PUR and PIR insulation alternative.
ISO, TSE, and CE certificates.

5 ribs profiled outer sheet.
I prepainted galvanized steel or aluminum inner and outer sheet alternatives.
Production in various color options.
Application on roofs with a slope higher than 5%
Fire performance according to TS EN 13501-1B-s2; d0 for PUR insulated roof panels, B-s1; d0 for PIR insulated roof panels.
Production flexibility at any ordered length between 2m & 15m.
Core thickness options 40-50-60-70-75-80-100-120-150-180-200 mm.
According to TS EN 14509, U values range between 0,49 – 0,11 W/m2K depending on the panel thickness.
EPS insulation alternatives besides PUR and PIR insulation.
ISO, TSE, and CE quality certificates.

3 ribs profiled the outer sheet.
Prepainted galvanized steel or aluminum inner and outer sheet alternatives.
Production in various color options.
Application on roofs with a slope higher than 5%.
Possibility to screw from the middle rib.
Optional middle cap profile.
Full impermeability via the cap profile placed on the connecting screws.
Fire performance according to TS EN 13501-1,B-s2; d0 for PUR insulated roof panels,B-s1; d0 for PIR insulated roof panels.
Production flexibility at any ordered length between 2 m - 15 m.
Core thickness options 40-50-60-70-75-80-100-120-150-180-200 mm.
According to TS EN 14509, U values range between 0,52 – 0,14 W/m2K depending on the panel thickness.
PUR and PIR insulation alternative.
ISO, TSE, CE quality certificates.

5 ribs profiled outer sheet.
Prepainted galvanized steel or aluminum inner and outer sheet alternatives.
Production in various color options.
Application on roofs with a slope higher than 5%.
Possibility to screw from the middle rib.
Optional middle cap profile.
Full impermeability via the cap profile placed on the connecting screws.
Fire performance according to TS EN 13501-1,B-s2; d0 for PUR insulated roof panels,B-s1; d0 for PIR insulated roof panels.
Production flexibility at any ordered length between 2 m - 15 m.
Core thickness options 40-50-60-70-75-80-100-120-150-180-200 mm.
According to TS EN 14509, U values range between 0,52 – 0,14 W/m2K depending on the panel thickness.
PUR and PIR insulation alternative.
ISO, TSE, CE quality certificates.

5 ribs profiled outer sheet.
Prepainted galvanized steel or aluminum inner and outer sheet alternatives.
Production in various color options.
Application on roofs with a slope higher than 5%.
Possibility to screw from the middle rib.
Optional middle cap profile.
Full impermeability via the cap profile placed on the connecting screws.
Fire performance according to TS EN 13501-1, B-s2; d0 for PUR insulated roof panels, B-s1; d0 for PIR insulated roof panels.
Production flexibility at any ordered length between 2m and 15m.
Core thickness options 40-50-60-70-75-80-100-120-150-180-200 mm.
According to TS EN 14509, U values range between 0,52 – 0,14 W/m2K depending on the panel thickness.
PUR and PIR insulation alternative.
ISO, TSE, CE quality certificates.

5 ribs profiled the inner sheet.
The inner sheet is prepainted galvanized steel, outer sheet is a PVC Membrane
Production in various color options.
Application of flat roofs and roofs with a slope lower than 5%.
Fire performance according to TS EN 13501-1, B-s2; d0 for PUR insulated roof panels, B-s1; d0 for PIR insulated roof panels.
Production flexibility at any ordered length between 2m & 12m.
Core thickness options 40-50-60-70-75-80-100-120-150-180-200 mm.
PVC Membrane thickness options 1,20-1,50-1,80-2,00 mm.
According to TS EN 14509, U values range between 0,49 – 0,11 W/m2K depending on the panel thickness.
Mineral Wool insulation alternatives. besides PUR and PIR insulation

5 ribs profiled the inner sheet.
The inner sheet is prepainted galvanized steel, outer sheet is a PVC Membrane
Production in various color options.
Application of flat roofs and roofs with a slope lower than 5%.
Fire performance according to TS EN 13501-1, B-s2; d0 for PUR insulated roof panels, B-s1; d0 for PIR insulated roof panels.
Production flexibility at any ordered length between 2m & 12m.
Core thickness options 40-50-60-70-75-80-100-120-150-180-200 mm.
PVC Membrane thickness options 1,20-1,50-1,80-2,00 mm.
According to TS EN 14509, U values range between 0,49 – 0,11 W/m2K depending on the panel thickness.
Mineral Wool insulation alternatives. besides PUR and PIR insulation

3 ribs profiled outer sheet.
Inner sheet is GRP, outer sheet is prepainted galvanized steel or aluminum
Production in various color options.
Application on roofs with a slope higher than 5%.
Possibility to use at modern animal and poultry husbandry facilities, and environments requiring chemical resistance.
Fire performance according to TS EN 13501-1, B-s2; d0 for PUR insulated roof panels, B-s1; d0 for PIR insulated roof panels.
Production flexibility at any ordered length between 2m & 12m.
Core thickness options 40-50-60-70-75-80-100-120-150-180-200 mm.
GRP thickness options between 0,70 mm – 1,00 mm.
According to TS EN 14509, U values range between 0,49 – 0,11 W/m2K depending on the panel thickness.
PUR and PIR insulation alternative.

5 ribs profiled outer sheet.
I prepainted galvanized steel inner and outer sheet material.
Production in various color options.
Usage in buildings that require fire safety.
Application on roofs with a slope higher than 5%.
Fire performance according to TS EN 13501-1, A2-s1; d0 for Rock Wool insulated roof panels.
Production flexibility at any ordered length between 2m & 12m.
Core thickness options 50-60-80-100-120-150 mm.
According to TS EN 14509, U values range between 0,63 – 0,23 W/m2K depending on the panel thickness.
PUR, PIR, and EPS insulation alternatives besides Rock Wool insulation.
ISO, TSE, and CE quality certificates.

5 ribs profiled the inner sheet.
The inner sheet is prepainted galvanized steel, outer sheet is PVC or TPO Membrane.
Production in various color options.
Usage in buildings that require fire safety.
Application of terrace roofs and roofs with a slope lower than 5%.
Fire performance according to TS EN 13501-1, B-s1; d0 for Rock Wool insulated roof panels.
Production flexibility at any ordered length between 2m & 12m.
Core thickness options 50-60-80-100-120-150 mm.
PVC or TPO membrane thickness options 1,20-1,50-1,80-2,00 mm.
According to TS EN 14509, U values range between 0,62 – 0,23 W/m2K depending on the panel thickness.
PUR and PIR insulation alternatives besides Rock Wool insulation.

5 ribs profiled the inner sheet.
The inner sheet is prepainted galvanized steel, and the outer sheet is galvanized sheet coated with PVC membrane.
Production in various color options.
Usage in buildings that require fire safety.
Application of flat roofs and roofs with a slope lower than 5%.
Production flexibility at any ordered length between 2m & 12m.
Core thickness options 50-60-80-100-120-150 mm.
PVC membrane thickness options 1,20-1,50-1,80-2,00 mm.
According to TS EN 14509, U values range between 0,62 – 0,23 W/m2K depending on the panel thickness.
PUR and PIR insulation alternatives besides rock wool insulation.