SI-E semi-insulating doors are designed for internal installation in air-conditioned areas with minimum working temperatures ≥ 12°C, ∆T ≤ 12°C, R.H. ≤ 60%. They can only be used as service doors and not for uses requiring a hermetic or thermal seal. They can be supplied for installation on panels or brick walls.

Available thicknesses:
40 mm

SI-E semi-insulating doors are designed for internal installation in air-conditioned areas with minimum working temperatures ≥ 12°C, ∆T ≤ 12°C, R.H. ≤ 60%. They can only be used as service doors and not for uses requiring a hermetic or thermal seal. They can be supplied for installation on panels or brick walls.

Available thicknesses:
40 mm

VVE & VV-EG semi-insulating doors are designed for installation in air-conditioned rooms with minimum working temperatures > 12°C, ∆T < 12°C, R.H. < 60%. They can only be used as service doors and not for uses requiring a hermetic or thermal seal.
They can be supplied for installation on panels or brick walls.

Available thicknesses:
40 mm

VVF & VV-FG semi-insulating doors are designed for installation in air-conditioned rooms with minimum working temperatures > 12°C, ∆T < 12°C, R.H. < 60%. They can only be used as service doors and not for uses requiring a hermetic or thermal seal.
They can be supplied for installation on the panel.

Available thicknesses:
40 mm

The semi-insulating doors VVPE - VVPEG (to-and-from in high-density polyethylene) are designed for installations in air-conditioned rooms with minimum working temperatures > 12 °C, ∆T < 12 °C, U.R. < 60% they can only be used as service entrances and not for uses requiring a hermetic and thermal seal. They can be supplied for installation on panels or brick walls.
High-density polyethylene is a sturdy material with excellent rigidity and resistance to impact. For this reason, VVPE doors are particularly suited to environments where there is heavy traffic of trolleys; polyethylene is also a non-toxic material and it has good chemical resistance.

The Transparent Flexible Doors Unika Visioflex are an effective barrier to the passage of air through isothermal doors in the event they remain open due to intensive traffic, whether pedestrian or trolleys. They offer maximum protection against heat loss, controlling energy consumption. They are also a valid solution in case a dividing door with maximum visibility is required.

The absence of posts allows optimization of the door opening, unlike the conventional “FLAP” doors. It is much more accessible compared to the traditional Strip Doors as it avoids the hassle of strips that fall against the operator, so passage is easier even when the user’s hands are full. They are easy to install and virtually maintenance-free.

The flap doors in PVC (flexible doors), available in a double-door version, consist primarily of a sturdy structure in galvanised steel (painted or optional stainless steel) that sustains a flexible skirt of transparent PVC, suitable for use with positive temperatures or, upon request, with low temperatures, conveniently reinforced in high-stress points and complete with a torsion-spring reclosing mechanism.

They are available in 3 different versions:
Manual (as described above), operates with a simple push.
Pneumatic touch, complete with an actuation device consisting of two-way pneumatic pistons that allow the doors to open with a light push, in both directions, with a spring catch.
Electro-pneumatic, complete with an actuation device consisting of one-way pneumatic pistons that allow the doors to open, in a single direction, following the activation of a remote control such as a photocell, radar, metal detector, button, or pull-cord, with a torsion-spring reclosing system.

The PVC strip curtains are suitable for separating different working areas and they serve as flexible barriers next to isothermal doors, to reduce the thermal loss or the entry of hot air (to prevent condensation) during the daily operation of opening and closing.

Available in 3 different versions:
ST LT
ST HY
ST PVC

With PVC flat frame and PVC side frame. CRC today boats a new production line developed thanks to the great expertise of its team and focused exclusively on the industrial door sector, both hinged and sliding type, for installation on panels and on masonry.

The standard Boxcold door has specific features designed to obtain the highest possible yield. Each door has a leaf with an aluminum perimeter profile, hinges with a ramp and possibility of height/depth adjustment, an outside handle with a key, and an inside handle with emergency push button.
A silicone rubber gasket along the perimeter is designed to allow the use of the door for cold rooms with and without a floor. For doors of thickness 10-12-14 cm (optional for thickness 8 cm), an anti-condensation electric heater along the door clear passage perimeter is supplied by default.

The standard Boxcold door has specific features designed to obtain the highest possible yield. Each door has a leaf with an aluminum perimeter profile, hinges with a ramp and possibility of height/depth adjustment, an outside handle with a key, and an inside handle with emergency push button.
A silicone rubber gasket along the perimeter is designed to allow the use of the door for cold rooms with and without a floor. For doors of thickness 10-12-14 cm (optional for thickness 8 cm), an anti-condensation electric heater along the door clear passage perimeter is supplied by default.

The ZIP rapid roll-up door is the most versatile of the Active range. The mantle is provided with PVC zips, sliding on self-lubricating polyethylene guides, and connects the sheet for the entire height of the door ensuring water tightness and wind resistance (class 3). The ZIP doors are self-repairing up to a width of 4000 mm.

The GLIDE rapid roll-up door is suitable for applications in supermarkets and sales points; is silent and requires little maintenance. Consists of an enclosed mantle and a lower aluminum alloy bar that slides freely in the guides. The lower bar goes back into the guides in the case of accidental impact.

The GLIDE K rapid roll-up door is suitable for applications in supermarkets and sales points; is silent and requires little maintenance. Consists of an enclosed mantle and a lower aluminum alloy bar that slides freely in the guides. The lower bar goes back into the guides in the case of accidental impact. The “K” line features a motor housed inside the winding tube, which allows installation in corridors and any other limited space, and the opening speed is increased to 2.5 m/s.

THE PURA K-IX RAPID ROLL-UP DOOR is characterised by the sheet sliding on grates. Designed to offer the maximum sealing for internal applications in areas where particular environmental and hygiene conditions must be maintained, such as laboratories, pharmaceutical industry buildings, or food handling areas. The “K” line features a motor housed inside the winding tube, which allows installation in corridors and any other limited space, and the opening speed is increased to 2.5 m/s.

The 304 stainless steel structure ensures robustness and strength, even under high-pressure washing.
The PURA K-IX is designed to offer maximum seal, with pressure differences of up to 40 Pascal.
Hermetic seal ensured by:
seal on the upper box to seal the sheet against the thrust of air pressure;
seal on the lower part of the sheet for ground contact;
grate system on the uprights, to prevent from the air going through, in the event of pressure/ depression on the sheet.

The FREEZER rapid roll-up door is characterised by an operating temperature of up to -25°C, with a maximum temperature difference of 30°C between the inside and outside of the cold store room. Suitable for food environments and minimise the release of cold when the storerooms are opened.

The SZ sectional doors are designed to be reliable, long-lasting, and safe. We offer flexible doors that can be adapted to every need and size; we supply high-quality safety and control systems that comply with European standards.

The ZIP K rapid roll-up door is a high-speed ZIP door with a space-saving design. The mantle has PVC zips that slide on self-lubricating polyethylene guides and connect the sheet for the entire height of the door ensuring water tightness and wind resistance (class 3). The “K” line features a motor housed inside the winding tube, which allows
installation in corridors and any other limited space, and the opening speed is increased to 2.5 m/s.

The FOLD-UP door is strong thanks to the folded frame in a 3 mm thick galvanised steel sheet.
The folding system consists of a sheet (PVC-coated fabric) strengthened internally by galvanised steel tubes placed inside welded pockets. The diameter of the strengthening tubes varies according to the resistance class for the required air pressure. The sheet assembly is lifted thanks to belts secured above the winding shaft.

The combination of high-quality raw materials and groundbreaking and cutting-edge productive processes – thanks especially to the latest profiling, pressing, and foaming technological systems – allows us to achieve the best possible production also of standard cold rooms.

CRC cold rooms can be completed and made work perfectly and immediately thanks to a Coldyfor refrigerating unit – saddle or ceiling monoblocks and split units - and internal shelving in aluminum and polyethylene.