Isothermal panels with tongue and groove joint and polyurethane sealing gasket, produced in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at both positive and negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly.

Available in 3 models:
GS 112 Cs3_N: Micro-ribbing on two sides
GS 112 Cs3_C: Semi-smooth (with coplanar joint)
GS 112 Cs3_L: Smooth on two sides

Isothermal panels with tongue and groove joint and polyurethane sealing gasket, produced in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at both positive and negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly.

Available in 3 models:
GS 112 Ds3_N: Micro-ribbing on two sides
GS 112 Ds3_C: SSemi-smooth (with coplanar joint)
GS 112 Ds3_L: Smooth on two sides

Isothermal panels with tongue and groove joint and polyurethane sealing gasket, produced in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at both positive and negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly.

Available in 3 models:
GS 112 Bs1_N: Micro-ribbing on two sides
GS 112 Bs1_C: Semi-smooth (with coplanar joint)
GS 112 Bs1_L: Smooth on two sides

Isothermal panels with tongue and groove joint and polyurethane sealing gasket, produced in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at both positive and negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly.

Available in 3 models:
GS 112 Bs1_N: Micro-ribbing on two sides
GS 112 Bs1_C: Semi-smooth (with coplanar joint)
GS 112 Bs1_L: Smooth on two sides

Isothermal panels with tongue and groove joints, produced using the one-shot air intake injection system, in compliance with European regulation EN 14509, are appropriate for the realization of cold rooms at positive or negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly.

Available in 3 models:
PGS 112 Bs3_N: Micro-ribbing on two sides
PGS 112 Bs3_C: Semi-smooth (with coplanar joint)
PGS 112 Bs3_L: Smooth on two sides

Sandwich panels with tongue and groove joint, produced using the one-shot air intake injection system, in compliance with European regulation EN 14509, appropriate for the realization of cold rooms at positive or negative temperatures. The panels are created to provide high thermal isolation performance, as well as mechanical strength, a pleasing appearance, hygiene, and easy assembly. A perfect union between panels and easy assembly is supported by the use of camlocks.

Available in 3 models:
PGS 112G Bs3_N: Micro-ribbing on two sides
PGS 112G Bs3_C: Semi-smooth (with a coplanar joint)
PGS 112G Bs3_L: Smooth on two sides

Sandwich panels with tongue and groove joint produced with an air intake one-shot system, consisting of 2 laminates made of PRFV (polyester reinforced with glass fiber also known as fiberglass) between which high-density PUR foam is injected. Appropriate for the realization of cold rooms at both positive and negative temperatures, processing rooms, agricultural/food areas with highly aggressive agents such as dairies, cured meat factories, seafood/fish processing, and all food products in general.

Designed to provide excellent resistance to contact, thermal insulation, a pleasing appearance, hygiene, and easy assembly, perfect panel union is ensured through camlocks, which also make assembly easier.

VH 112 is an innovative patented range of isothermal sandwich panels suitable for controlled temperature rooms.
The configuration of the joint and the Glasincold antibacterial embossed finishing guarantee high hygiene performance for environments with a high risk of fungal and/or bacterial contamination. The VH 112 panels offer high resistance to knocks, high thermal insulation performance and are easy to install, and do not require the use of external components such as silicone or clips.

Composition:
2 polyester resin composite laminates reinforced with fiberglass (PRF), between which the insulating polyurethane is injected at high pressure with the “Air intake system one-shot” system.

Sandwich panels tongue-and-groove joint, with cam locks, manufactured in accordance with European standard EN 14509:2013, specifically designed for the construction of controlled temperatures and humidity rooms, food packaging rooms, clean rooms, ensure high performances of thermal insulation, mechanical strength, hygiene, and rapid assembling.

CRC uses a specific “linear” junction system between the panels and the other components that, unlike the “male-female” one, offer a high product versatility both as a wall panel and as a ceiling panel. Furthermore, this allows to increase and/or modify the cold rooms at any moment according to the needs.

The standard panels have both an internal and an external finish in scratch-resistant white galvanized pre-painted steel coated sheet, thickness 0,5 mm. The insulation among the panels is obtained by means of polyurethane foam (PUR) with a density of 43 Kg/m³.

All Boxcold floor panels have an internal finish in anti-slip grey PVC coated steel sheet, insulation in polyurethane foam (PUR) with a density of 43 Kg/m³ and a lower external finish in scratch-resistant white galvanized pre-painted steel coated sheet, thickness 0,6 mm.

0,6 mm steel sheet glued on a 12 mm wood composite.
Static capacity 4000 Kg/m2
Dynamic capacity 250 Kg
Punctual capacity 140 Kg

All Boxcold floor panels have an internal finish in anti-slip grey PVC coated steel sheet, insulation in polyurethane foam (PUR) with a density of 43 Kg/m³ and a lower external finish in scratch-resistant white galvanized pre-painted steel coated sheet, thickness 0,6 mm.

0,6 mm steel sheet glued on a 20 mm wood composite and PVC reinforcement spacers foamed in the shape of a honeycomb structure inside the panel.
Static capacity 6000 Kg/m2
Dynamic capacity 1500 Kg
Punctual capacity 300Kg

Incold's isothermal sliding doors are the ideal solution for separating refrigerated rooms while preserving the temperatures inside the cold rooms, ensuring maximum energy savings.

Available thicknesses:
68 mm (mod. SC 07 TN)
92 mm (mod. SC 09 TN)
92 mm (mod. SC 09 BT)
121 mm (mod. SC 12 BT)

Incold's SC 2B two-leaf isothermal sliding doors are the ideal solution for separating refrigerated rooms while preserving the temperatures inside the cold rooms and ensuring maximum energy savings.

Available thicknesses:
92 mm (mod. SC2B 09 TN)
121 mm (mod. SC2B 12 BT)

Isothermal Sliding doors SC 09 TNG with rail passage available for positive temperatures only.

Available thicknesses:
92 mm (mod. SC 09 TNG)

Frameless sliding doors SC-L available for temperatures above +4 °C with ∆T < 16 °C with R.H. (Relative Humidity) < 60%.

Available thicknesses:
68 mm (mod. SC-L 07 TN)

Door for “Controlled Atmosphere” cold rooms for preservation and ripening where the internal temperature is not lower than -5°C; it guarantees the hermetic seal of the cold room.

Available thicknesses:
100 mm (mod. SC.AC 10 TN)

CE-F isothermal hinged doors with monolithic leaf available for both positive and negative temperatures.

Available thicknesses:
68 mm (mod. CE-F 07 TN)
92 mm (mod. CE-F 09 BT)

CE-M isothermal hinged doors with monolithic leaf and rotating handles available for both positive and negative temperatures.

Available thicknesses:
68 mm (mod. CE-M 07 TN)
92 mm (mod. CE-M 09 BT)
121 mm (mod. CE-M 12 BT)

CE-MG isothermal doors with magnetic closing devices for chiller and freezer rooms, opening radius of 180° with self-closing until 90°

Available thicknesses:
68 mm (mod. CE-MG 07 TN)
92 mm (mod. CE-MG 09 BT)
121 mm (mod. CE-MG 12 BT)